*NOTE* Currently is an order in product from GKTECH In Australia. Takes roughly 3-4 weeks

Listing is for:
1x Pair of Z33 350Z on car adjustable front lower control arms
1x Pair of Z33 350z front on car adjustable compression rod

Introducing the ultimate suspension upgrade for your GRIP 350Z, combining both the 350Z Lateral Link and Compression Rod together make up our ultimate GRIP FLCA!

Lateral Link (FLCA)
The GKTECH 350Z Lateral Link is a direct OEM replacement, retaining the two-piece lower control arm design. These arms are ideal for all forms of grip racing, circuit racing, and time attack. The two-piece arm design allows for better bump steer control, resulting in a more consistent alignment while also improving camber gain when turning which maximizes front-end grip by allowing for a flatter contact patch.

Our arms offer the added benefit of high misalignment PTFE-lined spherical bearings for smooth operation and reduced bushing flex, ensuring consistent alignments. They are adjustable from -5mm to +35mm relative to the OEM length and have multiple mounting locations for the swaybar to adjust the roll bar rate.

Features:

• Laser cut and CNC machined from 20mm thick 4130 Chromoly steel
• CMM measured, CAD designed, and FEA tested
• Lubrication-free PTFE-lined rod ends and spherical bearings
• Adjustable from -5mm to +35mm in length relative to OEM
• Adjustable sway bar roll rate
• Durable black e-coating
  
  

Compression Rod
The GKTECH 350Z Compression Rod is a direct OEM replacement, retaining the two-piece lower control arm design. These rods are ideal for all forms of grip racing, circuit racing, and time attack. The two-piece arm design allows for better bump steer control, resulting in a more consistent alignment while also improving camber gain when turning which maximizes front-end grip by allowing for a flatter contact patch.

Our arms offer the added benefit of high misalignment PTFE-lined spherical bearings for smooth operation and reduced bushing flex, ensuring consistent alignments. They are adjustable from -5mm to +30mm relative to the OEM length. The kit includes two polyurethane bushes to ensure the arm returns to the center as required when the OEM rubber bushes are deleted through the use of this arm.

Features:

- Laser cut and CNC machined from 24mm thick 4130 Chromoly steel
- CMM measured, CAD designed, and FEA tested
- Lubrication-free PTFE-lined rod ends and spherical bearings
- Adjustable from -5mm to +30mm in length relative to OEM
- Durable black e-coating
- Polyurethane bushes to retain the arm in the optimal position

Suits:
Nissan
V35 SKYLINE
Z33 350Z

Sedan:
2003-2006 V35 (G35)

Coupe:
2003-2008 Z33 350z
2003-2007 V35 (G35)

Note - 2007-2008 V35 (G35) SEDAN uses Z34 370z/ V36 (G37) suspension