About
Description
*NOTE* Currently is an order in product from Nuke In Sweden. Takes Roughly 3-4 weeks to order in
Check out the Nuke website to see what else they offer and more info https://www.nukeperformance.com/
Listing is for:
1 x Aluminum triple fuel pump mounting bracket
3 x Nylon 39 mm fuel pump inserts
1 x Flanged M12 to M6 adapter for mounting pipe
2 x MC6S M5x20 stainless steel bolts
1 x MC6S M6x20 stainless steel bolt
The triple fuel pump mounting kit for the CFC Unit and FST enables secure installation of three high-pressure fuel pumps inside the integrated surge tank bucket.
Engineered for motorsport applications where maximum fuel delivery, reliability, and serviceability are critical. When combined with the appropriate fuel pumps, a triple fuel pump setup can support well beyond 1500+ hp on E85 and 2000+ hp on gasoline.
Designed specifically for CFC Units and single-outlet FSTs
Enables 2000hp+ installations in a Nuke Performance CFC Unit
Must be combined with one of our fuel pump mounting hose kits
Compatible with both 39mm and larger diameter fuel pumps
This precision-machined aluminum bracket allows for a triple fuel pump configuration in Nuke Performance CFC Units and single-outlet Fuel Surge Tanks. It is compatible with most common 39 mm outer diameter fuel pumps, including DW200, DW300, GST450, and GST520, and also supports larger diameter pumps such as DW400, DW550, and BR540.
A triple fuel pump mounting kit is required for CFC Unit and FST installations and is available to suit most of the most common fuel pumps on the market.
To properly route three fuel pumps to the CFC Unit, one of our triple fuel pump mounting kits must be used. Since the CFC Unit and single-outlet FSTs are equipped with only two 1/4" BSPP ports, two of the fuel pumps need to be merged into a single fuel line before reaching the outlet port. This is seamlessly handled by our triple fuel pump mounting kits, available for fuel pumps with either 8 mm or 10 mm barb connections (see compatibility list here).
Triple fuel pump mounting kit, ID8mm Part # : 150-20-105
Triple fuel pump mounting kit, ID10mm Part # : 150-20-106
Please note: When installing Bosch BR540, DeatschWerks DW400, or DW550 fuel pumps in a triple fuel pump setup, a custom fuel filter solution is required.
The standard filters supplied with Bosch BR540 (* see note below), DeatschWerks DW400, and DW550 fuel pumps are too large for triple pump installations. To ensure proper fitment in Nuke Performance CFC Units and single-outlet FSTs, a compact adapter and matching fuel filter are required. When using any of these fuel pumps, make sure to add the correct adapter and filter to your order.
Pre-filter for Bosch BR540 - CFC / FST installation Part # : 9-900-107 *
Pre-filter for Deatschwerks DW400 - CFC / FST installation Part # : 9-900-108
* Bosch BR540 fuel pumps purchased directly from Nuke Performance are delivered with the correct compact filter pre-installed. The green OEM Bosch filter is not compatible with triple pump setups.
Description
*NOTE* Currently is an order in product from Nuke In Sweden. Takes Roughly 3-4 weeks to order in
Check out the Nuke website to see what else they offer and more info https://www.nukeperformance.com/
Listing is for:
1 x Aluminum triple fuel pump mounting bracket
3 x Nylon 39 mm fuel pump inserts
1 x Flanged M12 to M6 adapter for mounting pipe
2 x MC6S M5x20 stainless steel bolts
1 x MC6S M6x20 stainless steel bolt
The triple fuel pump mounting kit for the CFC Unit and FST enables secure installation of three high-pressure fuel pumps inside the integrated surge tank bucket.
Engineered for motorsport applications where maximum fuel delivery, reliability, and serviceability are critical. When combined with the appropriate fuel pumps, a triple fuel pump setup can support well beyond 1500+ hp on E85 and 2000+ hp on gasoline.
Designed specifically for CFC Units and single-outlet FSTs
Enables 2000hp+ installations in a Nuke Performance CFC Unit
Must be combined with one of our fuel pump mounting hose kits
Compatible with both 39mm and larger diameter fuel pumps
This precision-machined aluminum bracket allows for a triple fuel pump configuration in Nuke Performance CFC Units and single-outlet Fuel Surge Tanks. It is compatible with most common 39 mm outer diameter fuel pumps, including DW200, DW300, GST450, and GST520, and also supports larger diameter pumps such as DW400, DW550, and BR540.
A triple fuel pump mounting kit is required for CFC Unit and FST installations and is available to suit most of the most common fuel pumps on the market.
To properly route three fuel pumps to the CFC Unit, one of our triple fuel pump mounting kits must be used. Since the CFC Unit and single-outlet FSTs are equipped with only two 1/4" BSPP ports, two of the fuel pumps need to be merged into a single fuel line before reaching the outlet port. This is seamlessly handled by our triple fuel pump mounting kits, available for fuel pumps with either 8 mm or 10 mm barb connections (see compatibility list here).
Triple fuel pump mounting kit, ID8mm Part # : 150-20-105
Triple fuel pump mounting kit, ID10mm Part # : 150-20-106
Please note: When installing Bosch BR540, DeatschWerks DW400, or DW550 fuel pumps in a triple fuel pump setup, a custom fuel filter solution is required.
The standard filters supplied with Bosch BR540 (* see note below), DeatschWerks DW400, and DW550 fuel pumps are too large for triple pump installations. To ensure proper fitment in Nuke Performance CFC Units and single-outlet FSTs, a compact adapter and matching fuel filter are required. When using any of these fuel pumps, make sure to add the correct adapter and filter to your order.
Pre-filter for Bosch BR540 - CFC / FST installation Part # : 9-900-107 *
Pre-filter for Deatschwerks DW400 - CFC / FST installation Part # : 9-900-108
* Bosch BR540 fuel pumps purchased directly from Nuke Performance are delivered with the correct compact filter pre-installed. The green OEM Bosch filter is not compatible with triple pump setups.
Nuke Triple fuel pump mounting kit for CFC Unit and FST (Order in)
- Regular price
- $89.99
- Sale price
- $89.99
- Regular price
-
Tax included.
Shipping calculated at checkout.
Translation missing: en.products.product.sku:SCR NUK0920
Couldn't load pickup availability
Order in
NZ’s Fastest Auto Parts Shippers
Scarles Shipping
We ship throughout New Zealand using NZ Post, NZ Couriers, and Owens Freight, depending on the size and weight of your order.
Shipping rates are calculated at checkout based on your location and the items in your cart.
Delivery timeframes:
Auckland: overnight
Rest of North Island: 1–2 days
South Island: 1–3 days
Bulky and freight items
Some items, including race seats, large exhaust systems, and oversized freight, are shipped via our freight carrier. Rates for these are shown at checkout. For rural South Island delivery on large items, we'll contact you with a quote before dispatch.
International orders
We don't offer automatic international shipping rates. Request a quote, and we'll get back to you with rates and delivery times before you purchase.
Questions?
Head to our FAQs or contact us - we're here to help.
We provide hassle-free shopping with super fast shipping for all your parts needs.
Open 7 Days
Refunds and Returns Policy
We accept returns within 14 days after the invoice date, if the product isn't suitable for your application. The product must be returned in original condition (how we sold or sent it to you) and with our packaging. Full Refunds/Store Credit are not issued in this instance, however we can exchange it with another product. If an exchange product is not required, a refund may be issued subject to a 15% restocking fee (freight costs cannot be returned). Any product returned damaged or not in saleable condition will be assessed and an appropriate damage fee will apply. This policy excludes drop-shipped, clearance, sale items or special order products.
Email sales@scarles.co.nz for refund or return information.
FAULTY PRODUCT
Any issue or fault with a product must be brought to our attention immediately by contacting us at sales@scarles.co.nz before any action is taken. We will then consider the best course of action, which may include you returning the product for inspection.
Once the item is received we will assess the fault. All faulty products will be inspected/tested by either the original manufacturer or a professional. This process time frame varies depending on the product. If the product is deemed a manufacture fault a full refund or replacement can be offered.
We do not cover any additional fitment costs, certification costs, extra parts or freight required to make the item fit or work or any loss of time/wages/business occurred. The product provided even if it is stated as a “direct fit” does not imply no additional parts maybe required.
TRADEME
Please note: Items sold on Trade Me are offered on an ‘as is, where is’ basis. As the factory warranty is no longer valid, we’re unable to provide additional cover on these products.
For more information head over to our FAQs page or email us sales@scarles.co.nz
Got questions? Visit our store or contact us for any product or order-related queries.
