About
Description
*NOTE* Currently is an order in product from Nuke In Sweden. Takes Roughly 3-4 weeks to order in
Check out the Nuke website to see what else they offer and more info https://www.nukeperformance.com/
Listing is for:
5 x Bosch Motorsport injector (# 0280158040)
5 x Injector adapter 14mm short - with filter (# 135-01-101)
5 x Injector adapter 14mm short - without filter (# 135-01-102)
5 x Bosch injector clip (# 135-01-005)
1 x Flow match certificate
Flow matched Bosch 980cc injector, high impedance - adapted to 65mm (EV14L) to fit the Nuke Performance range of 5cyl fuel rails.
This injector is equipped with the needed accessories according to a Bosch EV14L injector (60,65mm between O-rings / 65mm center to center of the O-rings).
High impedance 980cc injector from Bosch Motorsport
Corresponding to a Bosch EV14 L injector length
Kit of x5 flow matched 980cc injectors
Filtered top adapter for additional protection
When ordering injectors, always check the specifications of your fuel rail to accommodate the accurate injector type. Most Nuke Performance fuel rails use EV14L-sized injectors, available between 630cc to 2200cc.
Bosch Motorsport 980cc Injector specifications :
For guidance on selecting the right injector for your application, please visit our FAQ (available here) for more information.
| Bosch part number | 0280158040 / Bosch -040 |
| OEM part number | 0 280 158 040 |
| Type - w/o included adapters | 39mm EV14K (Compact) |
| Type - with included adapters | 65mm EV14L (Long) |
| Connector | Bosch JPT EV1 Minitimer Jetronic |
| O-ring top / bottom | 14mm Viton / 14mm Viton |
| Resistance | 12 ohm |
| Volume at 3 BAR | 980cc/min = 670g/min = 89lb/hr @ 3bar |
| Fuel compatibility | Petrol / Gasoline / E85 / M100 * |
| Nozzle / Spray pattern | Extended tip / Single cone spray |
| For motorsports use | YES |
| Part # / EAN | 130-05-098 / 7340209508390 |
* Note: If using the injector with methanol, flush it with regular fuel after use. Do not leave methanol in the injector for extended periods.
Bosch 980cc Injector capacity :
Test conditions can differ from real-world use due to equipment and technical factors. However, this info helps understand injector performance and when choosing other fuel system components.
Learn more : Visit our FAQ / Injector calculator
|
Measured peak static flow in a test environment | |
| 2 BAR (29 PSI) | 720cc / min = 69 lb / h |
| 3 BAR (43.5 PSI) | 900cc / min = 86 lb / h |
| 4 BAR (58 PSI) | 1038cc / min = 99 lb / h |
| 5 BAR (78.5 PSI) | 1170cc / min = 111 lb / h |
| 6 BAR (88 PSI) | 1284cc / min = 122 Ib / h |
| 7 BAR (101.5 PSI) | 1344cc / min = 128 lb / h |
| Petrol (10% margin) | Turbo charged | Naturally aspirated |
| 1 cyl | 1x129 = 129hp | 1x168 = 168hp |
| 4 cyl | 4x129 = 516hp | 4x168 = 672hp |
| 5 cyl | 5x129 = 645hp | 5x168 = 840hp |
| 6 cyl | 6x129 = 774hp | 6x168 = 1008hp |
| 8 cyl | 8x129 = 1032hp | 8x168 = 1344hp |
| E85 (10% margin) | Turbo charged | Naturally aspirated |
| 1 cyl | 1x112 = 112hp | 1x140 = 140hp |
| 4 cyl | 4x112 = 448hp | 4x140 = 560hp |
| 5 cyl | 5x112 = 560hp | 5x140 = 700hp |
| 6 cyl | 6x112 = 672hp | 6x140 = 840hp |
| 8 cyl | 8x112 = 896hp | 8x140 = 1120hp |
Injector calculation : The figures listed above are based on a base pressure of 3 BAR (43.5 PSI) at idle, providing a quick overview of this injector's performance. For more details on selecting the best injector for your engine, visit our FAQ and use our Injector Calculator (available here).
Optional flow-matching for optimized performance and consistent fuel delivery for high-performance applications.
We offer all of our injectors as flow-matched in kits of 4, 5, 6, and 8 pcs (available here). Flow-matched injectors ensure consistent fuel delivery, optimizing performance, efficiency, and smoothness. Out-of-the-box injectors may vary in flow, leading to uneven fuel distribution and reduced performance. We recommend flow-matched injectors for all high-performance or tuned engines, where precise fuel delivery is critical. We deliver most injectors within a 1% difference, with a top difference of 2% for smaller batch injectors.
Bosch Motorsport : Bosch Motorsport injectors provide high precision, reliability, and durability, engineered for optimal performance in demanding applications. Known for consistent fuel delivery, they are ideal for racing and performance tuning, especially when paired with Nuke Performance's range of fuel system components.
Description
*NOTE* Currently is an order in product from Nuke In Sweden. Takes Roughly 3-4 weeks to order in
Check out the Nuke website to see what else they offer and more info https://www.nukeperformance.com/
Listing is for:
5 x Bosch Motorsport injector (# 0280158040)
5 x Injector adapter 14mm short - with filter (# 135-01-101)
5 x Injector adapter 14mm short - without filter (# 135-01-102)
5 x Bosch injector clip (# 135-01-005)
1 x Flow match certificate
Flow matched Bosch 980cc injector, high impedance - adapted to 65mm (EV14L) to fit the Nuke Performance range of 5cyl fuel rails.
This injector is equipped with the needed accessories according to a Bosch EV14L injector (60,65mm between O-rings / 65mm center to center of the O-rings).
High impedance 980cc injector from Bosch Motorsport
Corresponding to a Bosch EV14 L injector length
Kit of x5 flow matched 980cc injectors
Filtered top adapter for additional protection
When ordering injectors, always check the specifications of your fuel rail to accommodate the accurate injector type. Most Nuke Performance fuel rails use EV14L-sized injectors, available between 630cc to 2200cc.
Bosch Motorsport 980cc Injector specifications :
For guidance on selecting the right injector for your application, please visit our FAQ (available here) for more information.
| Bosch part number | 0280158040 / Bosch -040 |
| OEM part number | 0 280 158 040 |
| Type - w/o included adapters | 39mm EV14K (Compact) |
| Type - with included adapters | 65mm EV14L (Long) |
| Connector | Bosch JPT EV1 Minitimer Jetronic |
| O-ring top / bottom | 14mm Viton / 14mm Viton |
| Resistance | 12 ohm |
| Volume at 3 BAR | 980cc/min = 670g/min = 89lb/hr @ 3bar |
| Fuel compatibility | Petrol / Gasoline / E85 / M100 * |
| Nozzle / Spray pattern | Extended tip / Single cone spray |
| For motorsports use | YES |
| Part # / EAN | 130-05-098 / 7340209508390 |
* Note: If using the injector with methanol, flush it with regular fuel after use. Do not leave methanol in the injector for extended periods.
Bosch 980cc Injector capacity :
Test conditions can differ from real-world use due to equipment and technical factors. However, this info helps understand injector performance and when choosing other fuel system components.
Learn more : Visit our FAQ / Injector calculator
|
Measured peak static flow in a test environment | |
| 2 BAR (29 PSI) | 720cc / min = 69 lb / h |
| 3 BAR (43.5 PSI) | 900cc / min = 86 lb / h |
| 4 BAR (58 PSI) | 1038cc / min = 99 lb / h |
| 5 BAR (78.5 PSI) | 1170cc / min = 111 lb / h |
| 6 BAR (88 PSI) | 1284cc / min = 122 Ib / h |
| 7 BAR (101.5 PSI) | 1344cc / min = 128 lb / h |
| Petrol (10% margin) | Turbo charged | Naturally aspirated |
| 1 cyl | 1x129 = 129hp | 1x168 = 168hp |
| 4 cyl | 4x129 = 516hp | 4x168 = 672hp |
| 5 cyl | 5x129 = 645hp | 5x168 = 840hp |
| 6 cyl | 6x129 = 774hp | 6x168 = 1008hp |
| 8 cyl | 8x129 = 1032hp | 8x168 = 1344hp |
| E85 (10% margin) | Turbo charged | Naturally aspirated |
| 1 cyl | 1x112 = 112hp | 1x140 = 140hp |
| 4 cyl | 4x112 = 448hp | 4x140 = 560hp |
| 5 cyl | 5x112 = 560hp | 5x140 = 700hp |
| 6 cyl | 6x112 = 672hp | 6x140 = 840hp |
| 8 cyl | 8x112 = 896hp | 8x140 = 1120hp |
Injector calculation : The figures listed above are based on a base pressure of 3 BAR (43.5 PSI) at idle, providing a quick overview of this injector's performance. For more details on selecting the best injector for your engine, visit our FAQ and use our Injector Calculator (available here).
Optional flow-matching for optimized performance and consistent fuel delivery for high-performance applications.
We offer all of our injectors as flow-matched in kits of 4, 5, 6, and 8 pcs (available here). Flow-matched injectors ensure consistent fuel delivery, optimizing performance, efficiency, and smoothness. Out-of-the-box injectors may vary in flow, leading to uneven fuel distribution and reduced performance. We recommend flow-matched injectors for all high-performance or tuned engines, where precise fuel delivery is critical. We deliver most injectors within a 1% difference, with a top difference of 2% for smaller batch injectors.
Bosch Motorsport : Bosch Motorsport injectors provide high precision, reliability, and durability, engineered for optimal performance in demanding applications. Known for consistent fuel delivery, they are ideal for racing and performance tuning, especially when paired with Nuke Performance's range of fuel system components.
Nuke Bosch injector 980cc, 65mm (EV14L), 5pcs flow matched (Order in)
- Regular price
- $1,064.99
- Sale price
- $1,064.99
- Regular price
-
Tax included.
Shipping calculated at checkout.
Translation missing: en.products.product.sku:SCR NUK0975
Couldn't load pickup availability
Order in
NZ’s Fastest Auto Parts Shippers
Scarles Shipping
We ship throughout New Zealand using NZ Post, NZ Couriers, and Owens Freight, depending on the size and weight of your order.
Shipping rates are calculated at checkout based on your location and the items in your cart.
Delivery timeframes:
Auckland: overnight
Rest of North Island: 1–2 days
South Island: 1–3 days
Bulky and freight items
Some items, including race seats, large exhaust systems, and oversized freight, are shipped via our freight carrier. Rates for these are shown at checkout. For rural South Island delivery on large items, we'll contact you with a quote before dispatch.
International orders
We don't offer automatic international shipping rates. Request a quote, and we'll get back to you with rates and delivery times before you purchase.
Questions?
Head to our FAQs or contact us - we're here to help.
We provide hassle-free shopping with super fast shipping for all your parts needs.
Open 7 Days
Refunds and Returns Policy
We accept returns within 14 days after the invoice date, if the product isn't suitable for your application. The product must be returned in original condition (how we sold or sent it to you) and with our packaging. Full Refunds/Store Credit are not issued in this instance, however we can exchange it with another product. If an exchange product is not required, a refund may be issued subject to a 15% restocking fee (freight costs cannot be returned). Any product returned damaged or not in saleable condition will be assessed and an appropriate damage fee will apply. This policy excludes drop-shipped, clearance, sale items or special order products.
Email sales@scarles.co.nz for refund or return information.
FAULTY PRODUCT
Any issue or fault with a product must be brought to our attention immediately by contacting us at sales@scarles.co.nz before any action is taken. We will then consider the best course of action, which may include you returning the product for inspection.
Once the item is received we will assess the fault. All faulty products will be inspected/tested by either the original manufacturer or a professional. This process time frame varies depending on the product. If the product is deemed a manufacture fault a full refund or replacement can be offered.
We do not cover any additional fitment costs, certification costs, extra parts or freight required to make the item fit or work or any loss of time/wages/business occurred. The product provided even if it is stated as a “direct fit” does not imply no additional parts maybe required.
TRADEME
Please note: Items sold on Trade Me are offered on an ‘as is, where is’ basis. As the factory warranty is no longer valid, we’re unable to provide additional cover on these products.
For more information head over to our FAQs page or email us sales@scarles.co.nz
Got questions? Visit our store or contact us for any product or order-related queries.
