About
Description
NOTE: This item is specially ordered from GKTECH Australia and usually takes around 3-4 weeks to arrive.
Listing is for:
1x Conversion plate with hardware
When upgrading your S13/180sx rear brakes to Nissan 2 pot calipers/drum setup you will find the handbrake cables do not exactly line up to the S13/180sx chassis and handbrake lever.
The GKTECH cable conversion plate is made from laser cut 8mm thick steel and allows you to easily adapt R33 (2 door) cables to your S13/180sx chassis and handbrake lever.
We allow these lines to be located via the OEM handbrake pin which is cast into the cable bracket and also has incorporated an M8 thread in the plate to hold the cables down rather than the M6 thread used from OEM. This means you don’t have to waste time around with loose nuts on the top and fidgeting around with spanners and different tools.
While you are doing this conversion it would be worth upgrading the brake lines also. You can choose from either just the rear lines if you have the front sorted or a full kit.
Our full brake line kit is specifically made for an S13/180sx that is doing this conversion and using these brakes.
The GKTECH braided brake lines are assembled using stainless steel fittings and hose that consists of a Teflon inner tube wrapped in stainless steel braid and a PVC outer coating for protection. The brake lines have been independently tested to comply with FMVSS106 standards for brake hoses. This makes the lines ADR approved in Australia and they are marked as such on the brake line assemblies.
The FMVSS106 testing procedure that the lines have been tested against includes the following tests:
- 370lbs pull test
- 35 hour whip test
- 7000psi burst test
- -45degC to 146degC temperature tests
- 24 hour salt corrosion resistance test
We also offer R33 OEM handbrake cables to suit the 5 stud drum conversion
Suits:
NISSAN
S13 CA18 180SX
S13 CA18 SILVIA
S13 SR20 180SX
S13 SR20 SILVIA
Description
NOTE: This item is specially ordered from GKTECH Australia and usually takes around 3-4 weeks to arrive.
Listing is for:
1x Conversion plate with hardware
When upgrading your S13/180sx rear brakes to Nissan 2 pot calipers/drum setup you will find the handbrake cables do not exactly line up to the S13/180sx chassis and handbrake lever.
The GKTECH cable conversion plate is made from laser cut 8mm thick steel and allows you to easily adapt R33 (2 door) cables to your S13/180sx chassis and handbrake lever.
We allow these lines to be located via the OEM handbrake pin which is cast into the cable bracket and also has incorporated an M8 thread in the plate to hold the cables down rather than the M6 thread used from OEM. This means you don’t have to waste time around with loose nuts on the top and fidgeting around with spanners and different tools.
While you are doing this conversion it would be worth upgrading the brake lines also. You can choose from either just the rear lines if you have the front sorted or a full kit.
Our full brake line kit is specifically made for an S13/180sx that is doing this conversion and using these brakes.
The GKTECH braided brake lines are assembled using stainless steel fittings and hose that consists of a Teflon inner tube wrapped in stainless steel braid and a PVC outer coating for protection. The brake lines have been independently tested to comply with FMVSS106 standards for brake hoses. This makes the lines ADR approved in Australia and they are marked as such on the brake line assemblies.
The FMVSS106 testing procedure that the lines have been tested against includes the following tests:
- 370lbs pull test
- 35 hour whip test
- 7000psi burst test
- -45degC to 146degC temperature tests
- 24 hour salt corrosion resistance test
We also offer R33 OEM handbrake cables to suit the 5 stud drum conversion
Suits:
NISSAN
S13 CA18 180SX
S13 CA18 SILVIA
S13 SR20 180SX
S13 SR20 SILVIA
GKTECH S13/180SX DRUM HANDBRAKE CABLE CONVERSION PLATE (Order in)
- Regular price
- $94.99
- Sale price
- $94.99
- Regular price
-
Tax included.
Shipping calculated at checkout.
Translation missing: en.products.product.sku:SCR GKT0284
Couldn't load pickup availability
Order in
NZ’s Fastest Auto Parts Shippers
Scarles Shipping
We ship throughout New Zealand using NZ Post, NZ Couriers, and Owens Freight, depending on the size and weight of your order.
Shipping rates are calculated at checkout based on your location and the items in your cart.
Delivery timeframes:
Auckland: overnight
Rest of North Island: 1–2 days
South Island: 1–3 days
Bulky and freight items
Some items, including race seats, large exhaust systems, and oversized freight, are shipped via our freight carrier. Rates for these are shown at checkout. For rural South Island delivery on large items, we'll contact you with a quote before dispatch.
International orders
We don't offer automatic international shipping rates. Request a quote, and we'll get back to you with rates and delivery times before you purchase.
Questions?
Head to our FAQs or contact us - we're here to help.
We provide hassle-free shopping with super fast shipping for all your parts needs.
Open 7 Days
Refunds and Returns Policy
We accept returns within 14 days after the invoice date, if the product isn't suitable for your application. The product must be returned in original condition (how we sold or sent it to you) and with our packaging. Full Refunds/Store Credit are not issued in this instance, however we can exchange it with another product. If an exchange product is not required, a refund may be issued subject to a 15% restocking fee (freight costs cannot be returned). Any product returned damaged or not in saleable condition will be assessed and an appropriate damage fee will apply. This policy excludes drop-shipped, clearance, sale items or special order products.
Email sales@scarles.co.nz for refund or return information.
FAULTY PRODUCT
Any issue or fault with a product must be brought to our attention immediately by contacting us at sales@scarles.co.nz before any action is taken. We will then consider the best course of action, which may include you returning the product for inspection.
Once the item is received we will assess the fault. All faulty products will be inspected/tested by either the original manufacturer or a professional. This process time frame varies depending on the product. If the product is deemed a manufacture fault a full refund or replacement can be offered.
We do not cover any additional fitment costs, certification costs, extra parts or freight required to make the item fit or work or any loss of time/wages/business occurred. The product provided even if it is stated as a “direct fit” does not imply no additional parts maybe required.
TRADEME
Please note: Items sold on Trade Me are offered on an ‘as is, where is’ basis. As the factory warranty is no longer valid, we’re unable to provide additional cover on these products.
For more information head over to our FAQs page or email us sales@scarles.co.nz
Got questions? Visit our store or contact us for any product or order-related queries.
