Ford Ranger PX2, PX3 Dual Cab 3.2L CRD October 2016 – 2022 (with DPF)

$1,316.67 – $3,107.22

Complete DPF-back or “turbo back” Manta exhaust system – available in 3″ fully mandrel bent aluminised or stainless steel tubing (turbo back for offroad or race use only)

System Type: DPF Back, with single tip, DPF Back, with twin tip side exit, Full System, with single tip, Full System, with twin tip side exit
Noise Level: Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 3in Single, 3in With Cat, 3in Without Cat

Product Description

Everyone would agree, the Ranger could do with a little more poke!

Replacing the standard Ranger exhaust system with a 3” Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by de-restricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler. The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way.

Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking. It’s available in aluminised steel, with a 2-year warranty, or stainless steel, which carries a 10-year warranty, and is likely to last much longer! Give your Ranger the boost in power it deserves today, by fitting the Manta exhaust system!

Manta recommends their systems be installed by a professional installer.

Ford Ranger PX Dual Cab 3.2L CRD October 2011 – September 2016

$1,878.89 – $2,954.44

Complete “turbo back” Manta exhaust system – available in 3″ fully mandrel bent aluminised or stainless steel tubing, with the option of leaving out the diesel catalytic converter (intended for off-road use)

System Type: Full System, with single tip, Full System, with twin tip side exit
Noise Level: Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 3in With Cat, 3in Without Cat

Product Description

Everyone would agree, the Ranger could do with a little more poke!

Replacing the standard Ranger exhaust system with a 3” Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by de-restricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler. The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way.

Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking. It’s available in aluminised steel, with a 2 year warranty, or stainless steel, which carries a 10 year warranty, and is likely to last much longer! Give your Ranger the boost in power it deserves today, by fitting the Manta exhaust system!

Manta recommends their systems be installed by a professional installer.

FORD 2022 RANGER UTE NEXT GEN T6.2 V6 3.0L TURBO 2022 ONWARDS (WITH DPF)

$1,536.67 – $2,153.89

Complete DPF-back Manta exhaust system – available in 3″ fully mandrel bent aluminised (2 year warranty) or stainless steel (10 year warranty) tubing. We also offer a side exit twin tip option!

System Type: DPF Back with single tip, DPF Back, with twin tip side exit
Noise Level: Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 3in Single

Product Description

Introducing the Next Gen Ranger Manta Performance exhaust – the perfect upgrade for your Ford Ranger. This aftermarket exhaust system delivers a more noticeable note over the factory system that will turn heads wherever you go.

Crafted in Australia from high quality stainless steel or more affordable aluminised steel, Manta exhausts are built to last and withstand even the toughest off-road conditions. The mandrel-bent tubing ensures maximum air flow and better sound, while the optional side exit twin tips add a touch of style to your Ranger’s appearance.

Upgrade your Ranger’s appearance, sound and style with a Next Gen Ranger Manta Performance exhaust.

Manta recommends their systems be installed by a professional installer.

Ford Ranger PJ, PK 3.0L CRD Ute (manual), 2006 – 2011

$1,683.33 – $2,905.56

Complete “turbo back” Manta exhaust system – available in 3″ fully mandrel bent aluminised or stainless steel tubing, with the option of leaving out the diesel catalytic converter (intended for off-road use)

System Type: Full System,
Noise Level: Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 3in With Cat, 3in Without Cat

Product Description

Everyone would agree, the Ranger could do with a little more poke! Replacing the standard Ranger exhaust system with a 3” Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by derestricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler.

The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way.

Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking.

It’s available in aluminised steel, with a 2 year warranty, or stainless steel, which carries a 10 year warranty, and is likely to last much longer! Give your Ranger the boost in power it deserves today, by fitting the Manta exhaust system!

Manta recommends their systems be installed by a professional installer.

FORD 2022 RANGER UTE NEXT GEN T6.2 4CYL 2.0 BI-TURBO 2022 ONWARDS (WITH DPF)

$1,487.78 – $2,117.22

Complete DPF-back Manta exhaust system – available in 3″ fully mandrel bent aluminised (2 year warranty) or stainless steel (10 year warranty) tubing. We also offer a side exit twin tip option!

System Type: DPF Back with single tip, DPF Back, with twin tip side exit
Noise Level: Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 3in Single

Product Description

Introducing the Next Gen Ranger Manta Performance exhaust – the perfect upgrade for your Ford Ranger. This aftermarket exhaust system delivers a more noticeable note over the factory system that will turn heads wherever you go.

Crafted in Australia from high quality stainless steel or more affordable aluminised steel, Manta exhausts are built to last and withstand even the toughest off-road conditions. The mandrel-bent tubing ensures maximum air flow and better sound, while the optional side exit twin tips add a touch of style to your Ranger’s presence.

Upgrade your Ranger’s appearance, sound and style with a Next Gen Ranger Manta Performance exhaust.

Manta recommends their systems be installed by a professional installer.

Ford Ranger PX Dual Cab 2.2L CRD October 2011 – September 2016 Ford Ranger

$2,037.78 – $2,936.11

Complete “turbo back” Manta exhaust system – available in 3″ fully mandrel bent aluminised or stainless steel tubing, with the option of leaving out the diesel catalytic converter (intended for off-road use)

System Type: Full System
Noise Level: Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 3in With Cat, 3in Without Cat

Product Description

Everyone would agree, the Ranger could do with a little more poke!

Replacing the standard Ranger exhaust system with a 3” Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by de-restricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler. The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way.

Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking. It’s available in aluminised steel, with a 2 year warranty, or stainless steel, which carries a 10 year warranty, and is likely to last much longer! Give your Ranger the boost in power it deserves today, by fitting the Manta exhaust system!

Manta recommends their systems be installed by a professional installer.

Ford Ranger PJ, PK 3.0L CRD Ute (automatic), 2006 – 2011

$1,683.33 – $3,058.33

Complete “turbo back” Manta exhaust system – available in 3″ fully mandrel bent aluminised or stainless steel tubing, with the option of leaving out the diesel catalytic converter (intended for off-road use)

System Type: Full System
Noise Level: Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 3in With Cat, 3in Without Cat

Product Description

Everyone would agree, the Ranger could do with a little more poke!

Replacing the standard Ranger exhaust system with a 3” Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by derestricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler.

The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way.

Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking.

It’s available in aluminised steel, with a 2 year warranty, or stainless steel, which carries a 10 year warranty, and is likely to last much longer! Give your Ranger the boost in power it deserves today, by fitting the Manta exhaust system!

Manta recommends their systems be installed by a professional installer.