Ford Falcon BA, BF 5.4L BOSS 4 Valve V8 Ute (Including XR8, FPV models). Exhaust exit out driver’s side.

$1,940.00 – $6,480.56

Complete Manta exhaust system, available in mandrel bent dual 2.5″ and dual 3″ tubing. Choose between a complete exhaust system with extractors, or a “cat-back” system, replacing the last two sections of the standard exhaust.

System Type: Cat Back, Full System, with extractors
Noise Level: Loud, Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 2.5in Dual, 3in Dual

Product Description

The BA and BF Falcon introduced a completely new V8 power plant, displacing 5.4L, and based on the US modular V8 engine series. The BOSS version of this motor, found in the XR8 and FPV models produced 260kw, the highest output for a Ford vehicle up to that time, however this is a figure that can be improved by fitting a Manta Performance exhaust system, as the stock exhaust system is largely quite restrictive. The Manta exhaust helps unleash greater peak power and torque, while also improving low-down responsiveness. It also brings out a deep, rumbling V8 note, enhancing your driving experience, making the car sound like it really should!

There are a number of options, depending on your budget and requirements. The 2.5″ dual system has a deep, throaty tone. For the ultimate in performance and sound, the 3″ dual system can’t be beaten, being the only true dual 3″ all the way through available for the V8 Falcon Ute. For maximum longevity, our stainless steel systems are warranted for 10 years, and generally last the life of the vehicle, while our aluminised steel systems carry a 2 year warranty, and represent great value for money.

Manta recommends their systems be installed by a professional installer.

Ford Falcon BA, BF 5.4L BOSS 4 Valve V8 Ute (Including XR8, FPV models). Optional exhaust exit out both driver & passenger side.

$2,636.67 – $7,708.89

Complete Manta exhaust system, available in mandrel bent dual 2.5″ and dual 3″ tubing. Choose between a complete exhaust system with extractors, or a “cat-back” system, replacing the last two sections of the standard exhaust. Original bumper will need modifying to suit the twin left & right outlets.

System Type: Cat Back, Full System, with extractors
Noise Level: Loud, Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 2.5in Dual, 3in Dual

Product Description

The stock exhaust for the BA and BF XR8 and FPV ute with the BOSS 260 and BOSS 290 V8 had a dual exit out the driver’s side only. However for the ultimate in looks and performance, Manta is able to offer a quad tip exhaust system, exiting out the driver and passenger side. This system does require modification of the bumper, to allow for the extra cut-out, but the results make it more than worthwhile! The dual exit design gives the Falcon a distinctive “stereo” sound, due to each bank of cylinders exiting out separate sides of the vehicle, rather than both coming out the same side as with the stock exhaust system.

The cat back systems are ideal if you already have aftermarket headers and cats, or are just looking for improved sound, while the full systems with extractors deliver the best gains, have a throatier sound, and are essential if you are performing other engine modifications such as supercharging. High-flow straight through mufflers are used to control drone, while still allowing maximum performance, and giving off a deep throaty tone. Everything needed to install the exhaust, including a new chassis bracket for the passenger side, is included in the package.

Manta recommends their systems be installed by a professional installer.

Ford Falcon BA, BF 4.0L 6 Cylinder Ute (XT, XLS, RTV, 1 Ton – excluding XR6, LPG models)

$1,188.33 – $3,418.89

Complete Manta exhaust system, available in mandrel bent 2.5″ tubing. Choose between a complete exhaust system with extractors, or a “cat-back” system, replacing the last two sections of the standard exhaust.

System Type: Cat Back, Full System, with extractors
Noise Level: Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 2.5in Single

Product Description

The BA Falcon, and the subsequent BF model were a substantial update on the previous AU Falcon, featuring a complete interior and exterior redesign. They also had a completely revised Barra 6 cylinder motor, which in its naturally aspirated form produced up to 182kw. The performance of this engine was nevertheless hindered by the restrictive stock exhaust system, and substantial gains can be realised by fitting a Manta Performance exhaust upgrade.

The Manta exhaust system uses 2.5″ mandrel bent piping, which is perfectly matched to the Falcon’s output, giving good overall increases in power and torque, while also improving responsiveness down low. High flow mufflers are used to control noise without impeding on performance.

The full exhaust system with extractors will give the most noticeable increases in power and torque, while the cat back system is ideal if you are just looking for better sound, or a replacement for your stock exhaust system.

Manta recommends their systems be installed by a professional installer.

Ford Falcon BA, BF 4.0L XR6 Non Turbo 6 Cylinder Ute

$1,303.97 – $3,327.22

Complete Manta exhaust system, available in mandrel bent 2.5″ tubing. Choose between a complete exhaust system with extractors, or a “cat-back” system, replacing the last two sections of the standard exhaust. THIS SYSTEM INCLUDES A CHROME TIP.

System Type: Cat Back, Full System, with extractors
Noise Level: Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 2.5in Single

Product Description

The BA Falcon, and the subsequent BF model were a substantial update on the previous AU Falcon, featuring a complete interior and exterior redesign. They also had a completely revised Barra 6 cylinder motor, which in its naturally aspirated form produced up to 182kw. The performance of this engine was nevertheless hindered by the restrictive stock exhaust system, and substantial gains can be realised by fitting a Manta Performance exhaust upgrade.

The Manta exhaust system uses 2.5″ mandrel bent piping, which is perfectly matched to the Falcon’s output, giving good overall increases in power and torque, while also improving responsiveness down low. High flow mufflers are used to control noise without impeding on performance.

The full exhaust system with extractors will give the most noticeable increases in power and torque, while the cat back system is ideal if you are just looking for better sound, or a replacement for your stock exhaust system.

Manta recommends their systems be installed by a professional installer.

Ford Falcon BA, BF 5.4L V8 One Ton Ute

$2,013.33 – $2,538.89

Complete Manta exhaust system, available in mandrel bent dual 2.5″ tubing. Available as a “cat-back” system, replacing the last two sections of the standard exhaust.

System Type: Cat Back
Noise Level: Loud, Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 2.5in Dual

Product Description

The BA and BF One Ton Ute came with the option of a V8 power plant: the Barra 220 V8 motor also found in other BA and BF Falcons, which developed 220kw. This motor responds very well to a Manta Performance exhaust, gaining power and torque, together with responsiveness down low. The exhaust also unleashes a fantastic deep sounding exhaust growl, making the V8 RTV sound like it should! Mandrel bends and high flow straight through mufflers ensure maximum performance, while keeping drone under control.

The cat back configuration makes it a perfect and easy bolt on replacement for the stock exhaust system. The Manta Performance exhaust is available in either aluminised steel, with a 2 year warranty, or for the ultimate in longevity, stainless steel which carries a 10 year warranty.

Manta recommends their systems be installed by a professional installer.

Ford Falcon BA, BF 5.4L V8 RTV Ute

$2,013.33 – $2,820.00

Complete Manta exhaust system, available in mandrel bent dual 2.5″ tubing. Available as a “cat-back” system, replacing the last two sections of the standard exhaust.

System Type: Cat Back
Noise Level: Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 2.5in Single

Product Description

The BA and BF RTV Ute came with the option of a V8 power plant: the Barra 220 V8 motor also found in other BA and BF Falcons, which developed 220kw. This motor responds very well to a Manta Performance exhaust, gaining power and torque, together with responsiveness down low. The exhaust also unleashes a fantastic deep sounding exhaust growl, making the V8 RTV sound like it should! Mandrel bends and high flow straight through mufflers ensure maximum performance, while keeping drone under control.

The cat back configuration makes it a perfect and easy bolt on replacement for the stock exhaust system. The Manta Performance exhaust is available in either aluminised steel, with a 2 year warranty, or for the ultimate in longevity, stainless steel which carries a 10 year warranty.

Manta recommends their systems be installed by a professional installer.

Ford Falcon BA, BF 5.4L BARRA 3 Valve V8 Ute (all models excluding XR8 & FPV’s). Optional exhaust exit out both driver & passenger side.

$2,636.67 – $4,390.56

Complete Manta exhaust system, available in mandrel bent dual 2.5″ and dual 3″ tubing. Available as a “cat-back” system, replacing the last two sections of the standard exhaust. Original bumper will need modifying to suit the twin left & right outlets.

System Type: Cat Back
Noise Level: Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 2.5in Dual, 3in Dual

Product Description

The stock exhaust for the BA and BF XL and XLS utes with the Barra 220kw V8 had a dual exit out the driver’s side only. However for the ultimate in looks and performance, Manta is able to offer a quad tip exhaust system, exiting out the driver and passenger side. This system does require modification of the bumper, to allow for the extra cut-out, but the results make it more than worthwhile! The dual exit design gives the Falcon a distinctive “stereo” sound, due to each bank of cylinders exiting out separate sides of the vehicle, rather than both coming out the same side as with the stock exhaust system.

The cat back systems are ideal if you already have aftermarket headers and cats, or are just looking for improved sound, while the full systems with extractors deliver the best gains, have a throatier sound, and are essential if you are performing other engine modifications such as supercharging. High-flow straight through mufflers are used to control drone, while still allowing maximum performance, and giving off a deep throaty tone. Everything needed to install the exhaust, including a new chassis bracket for the passenger side, is included in the package.

Manta recommends their systems be installed by a professional installer.

Ford Falcon BA, BF 5.4L Barra 3 Valve V8 Ute (all models excluding XR8 & FPV’s)

$1,940.00 – $3,159.76

Complete Manta exhaust system, available in mandrel bent dual 2.5″ and dual 3″ tubing. Available as a “cat-back” system, replacing the last two sections of the standard exhaust.

System Type: Cat Back
Noise Level: Loud, Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 2.5in Dual, 3in Dual

Product Description

The BA and BF Falcon introduced a completely new V8 power plant, displacing 5.4L, and based on the US modular V8 engine series. The Barra version of this motor produced 220kw, however this is a figure that can be improved by fitting a Manta Performance exhaust system, as the stock exhaust system is largely quite restrictive. The Manta exhaust helps unleash greater peak power and torque, while also improving low-down responsiveness. It also brings out a deep, rumbling V8 note, enhancing your driving experience, making the car sound like it really should! There are a number of options, depending on your budget and requirements. The 2.5″ dual system has a deep, throaty tone. For the ultimate in performance and sound, the 3″ dual system can’t be beaten, being the only true dual 3″ all the way through available for the V8 Falcon. For maximum longevity, our stainless steel systems are warranted for 10 years, and generally last the life of the vehicle, while our aluminised steel systems are warranted for 2 years, and represent great value for money.

Manta recommends their systems be installed by a professional installer.

Ford Falcon BA, BF Turbo 4.0L 6 Cylinder Ute (all models inc. XR6)

$1,787.22 – $5,178.89

Complete Manta exhaust system, available in mandrel bent 3″, 2.5″ dual, and 3″ dual tubing. Choose between a complete exhaust system off the turbo, a complete system off the factory dump pipe, or a “cat-back” system, replacing the last two sections of the standard exhaust.

System Type: Cat Back, Full system, off factory dump pipe, Full system, turbo back
Noise Level: Medium, Quiet
Materials: Aluminised Steel, Stainless Steel
Pipe Size: 2.5in Dual, 3in Dual, 3in Single

Product Description

The BA and BF XR6 Turbo has tremendous potential, which can quickly be unleashed with the fitment of the Manta Performance Exhaust System. The full turbo back system replaces the entire standard exhaust system, freeing up the turbo and reducing lag, whilst improving top-end performance and reducing fuel consumption due to its higher flowing design that allows the engine to operate more efficiently. The exhaust note is much improved, allowing the whistle of the turbo to be heard. The two high-flow mufflers used ensure minimal in-cab drone, yet still maintain maximum flow and performance.

The dump pipe-back system suits more moderate applications, replacing the restrictive catalytic converter with a high flow version, whilst keeping the factory dump pipe. The cat-back system is also available, which bolts on behind the standard dump pipe and catalytic converter. The cat-back still gives a moderate increase in performance, while improving the sound of the vehicle, allowing that 6-turbo exhaust note to really be heard. For extreme applications, the dual 3″ system offers the highest flow possible, and is the only true dual 3″ exhaust system on the market for the XR6 turbo. All 2.5″ systems are available in either stainless steel and aluminised steel, with the stainless exhaust systems carrying a 10 year warranty against manufacturing defects. In reality, a stainless system should last the life of the vehicle.

Manta recommends their systems be installed by a professional installer.