{"product_id":"gktech-wilwood-s-chassis-34-dual-caliper-hidden-hydro-handbrake-kit-order-in","title":"GKTECH WILWOOD S-CHASSIS 3\/4\" DUAL CALIPER HIDDEN HYDRAULIC HANDBRAKE SETUP (Order in)","description":"\u003cp\u003e*NOTE* Currently is an order in product from GKTECH In Australia. Takes roughly 3-4 weeks\u003cbr\u003e\u003cbr\u003eListing is for:\u003cbr\u003e1x Hidden Handbrake Assembly\u003cbr\u003e1x Stand alone SS braided brake line kit\u003cbr\u003e1x Wilwood DynaPro dual piston caliper\u003cbr\u003e1x Wilwood BP-10 brake pads (set of 4 pads for 2 calipers)\u003cbr\u003e1x S-chassis dual caliper brackets to suit Wilwood caliper (pair)\u003cbr\u003e1x Stand-alone 3\/4\" internal reservoir master cylinder\u003c\/p\u003e\u003cp\u003eAvoid wasting time shopping around for all the individual parts, getting custom brake lines made up, or running generic parts that may or may not work.\u003cbr\u003e\u003cbr\u003eThe GKTECH S-chassis dual calliper hydraulic handbrake setup is the only COMPLETE kit available anywhere. Literally, everything required is included and it's a range of GKTECH and Wilwood components. If you have an S-chassis and you want your rear brakes to lock up in an instant, this kit is the way to go.\u003cbr\u003e\u003cbr\u003eNow available with our hidden hydraulic handbrake assembly for that stealth OEM look and feel in your cabin.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe contents: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHidden handbrake assembly: \u003c\/strong\u003e\u003cbr\u003eSelf explanatory, this is the handbrake assembly that houses master cylinder and converts your OEM cable setup into a lever to engage the master cylinder.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMaster cylinder:\u003c\/strong\u003e\u003cbr\u003eChoose between 5\/8\" and 3\/4\". For the Wilwood 2 pot calipers our recommendation is 5\/8\" but more on that below in the FAQ's.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual caliper brackets:\u003c\/strong\u003e\u003cbr\u003eThe bracket that allows the Wilwood caliper to fit on your OEM knuckle. Note: can only be used with OEM steel knuckles. Will not work with GT-R, R34 or Z32 aluminum knuckles.\u003cbr\u003e\u003cbr\u003eIf you are running the Gktech knuckles then you wouldn't need the bracket as the knuckles accommodate for the Wilwood calipers already.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBraided lines:\u003c\/strong\u003e\u003cbr\u003eMade in-house in Australia using stainless steel fittings and using stainless steel braided line with a PTFE outer these lines are made specifically to suit Nissan S chassis and even include the P clips to locate the line throughout your vehicle.\u003c\/p\u003e\u003cp\u003eThe GKTECH braided brake lines are assembled using stainless steel fittings and hose that consists of a Teflon inner tube wrapped in stainless steel braid and a PVC outer coating for protection. The brake lines have been independently tested to comply with FMVSS106 standards for brake hoses. This makes the lines ADR approved in Australia and they are marked as such on the brake line assemblies.\u003cbr\u003e\u003cbr\u003eThe FMVSS106 testing procedure that the lines have been tested against includes the following tests:\u003c\/p\u003e\u003cp\u003e- 370lbs pull test\u003cbr\u003e- 35 hour whip test\u003cbr\u003e- 7000psi burst test\u003cbr\u003e- -45degC to 146degC temperature tests\u003cbr\u003e- 24 hour salt corrosion resistance test\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrake calipers:\u003c\/strong\u003e\u003cbr\u003eWe have opted for the Wilwood 120-10188 caliper for this setup. They are a small but bitey caliper and only caliper that we found to work with the OEM 9mm thick rotors.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrake pads:\u003c\/strong\u003e\u003cbr\u003eOver the years we have tested many brake pads with these calipers and ended up at the Wilwood BP-10's. They're economical, readily available, very bitey and last.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: If you are running standard hubs\/knuckles the 5mm axle spacer is required\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eNOTE#2: Will NOT fit European delivered S-chassis' without the use of JDM or USDM calipers\/rotors.\u003cbr\u003e\u003cbr\u003eNOTE#3: Designed to be used with standard S-chassis 9mm rear rotors\u003cbr\u003e\u003cbr\u003eNOTE#4: The wilwood calipers have a mounting hole of 3\/8inch (9.52mm) and the studs used on our brackets are 10mm and as such the 2 mounting holes needs to be drilled out on the calipers to 10mm. This is very much a DIY kit and is easy to do.\u003cbr\u003e\u003cbr\u003eNOTE#5: The brackets themselves will NOT fit the Gktech rear drop knuckle\u003cbr\u003e\u003cbr\u003eNOTE#6: For the axle spacers, we can only confirm fitment on OEM wheel bearings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e\u003cbr\u003eNISSAN\u003cbr\u003eCEFIRO A31\u003cbr\u003eS13 CA18 180SX\u003cbr\u003eS13 CA18 SILVIA\u003cbr\u003eS13 SR20 180SX\u003cbr\u003eS13 SR20 SILVIA\u003cbr\u003eS14 200SX\/SILVIA\u003cbr\u003eS15 200SX\/SILVIA\u003c\/p\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":43816612495616,"sku":"SCR GKT0553","price":1619.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1781\/7141\/files\/IMG_6288.png?v=1713162811","url":"https:\/\/scarles.co.nz\/products\/gktech-wilwood-s-chassis-34-dual-caliper-hidden-hydro-handbrake-kit-order-in","provider":"Scarles","version":"1.0","type":"link"}